SHDSL EFM Line Card for MXK

SHDSL EFM Line Card for MXK

802.3ah compliant extended-rate SHDSL EFM (2Base-TL) line card for MXK


The MXK EFM SHDSL line card (MXK-EFM-SHDSL-24) has been designed to deliver high-speed Ethernet services over SHDSL. The line card provides high-density, EFM-compliant SHDSL aggregation with advanced features such as Zhone's Multimedia Traffic Management (MTM) and fully integrated OAM features for advanced management of Ethernet lines. Supporting both 802.3ah EFM standards as well as Zhone's proprietary Ethernet bonding technologies, the MXK EFM SHDSL line card is the most flexible Ethernet aggregation product available; the dual-mode operation supports all Network Extender SHDSL modems, while at the same time providing a clean aggregation point for new Ethernet Access Devices such as Zhone's EtherXtend 802.3ah compliant EFM modems (ETHX-3444 and ETHX-3484).

The MXK-EFM-SHDSL-24-NTP provides 24 individual single copper pair SHDSL lines, allowing for data rates ranging from 144Kbps up to 5.7Mbps symmetrical bandwidth per port. The MXK-EFM-SHDSL-24 also supports loop bonding (either EFM bonding or Ethernet Loop Bonding), which allows the service provider to bond multiple copper pairs together for bandwidths of over 22Mbps per end user (using the ETHX-3444 CPE) and over 45Mbps to a single end user (using the ETHX-3484 CPE). The MXK-EFM-SHDSL-24-NTP provides network timing for remote devices as well as power on each loop.

The MXK-EFM-SHDSL-24-NTWC provides network timing for remote devices as well as wetting current on each loop.

Categories: blc, eth, shdsl, loop-bonding,

24 extended-rate (5.7Mbps) SHDSL Interfaces (front panel-50 Pin Amphenol)

Standards Support
ITU G.994.1 G.handshake
IEEE 802.3 Ethernet
IEEE 802.3ah Ethernet in the First Mile (2Base-TL)
IEEE 802.3ah OAM
IEEE 802.1Q/p

Protocol Support
Multicast IGMP v1 / v2
Host-based routing for per-interface single IP address assignments
Network-based routing for per-interface IP subnet address assignments
IP host and gateway support
RFC 1483/2684 encapsulation
DHCP server (RFC 2131, 2132), DHCP Relay
Bridging 802.1D support
VLAN 802.1Q support
Dense / sparse multicast support
Integrated access control and content protection

ZMS (Zhone Management System) via SNMPv2c for GUI and CORBA IDL machine interface
Terminal for Command Line Interface (CLI)
Out-band IP via 10/100 Ethernet or V.24 serial for async terminal

Data rates provisionable up to 5.7Mbps symmetrical
Distances up to 24,000ft/7,320m

Regulatory Compliance
Safety: UL 60950-1; CSA 60950-1; EN 60950-1
Emissions: EN 55022A*; PART 15A (FCC)
Immunity: GR-1089-CORE, Issue 3*; SR-3580, Issue 1*; ATT-TP-76200, Issue 14*; VZ.TPR.9205, Issue 3*
Environmental: GR-63-CORE, Issue 3*

*In process

Operating Requirements
Temperature: -40ºC to 65ºC
Non operating temperature: -40ºF to 158ºF (-40ºC to 70ºC)
Humidity: Up to 85%, non-condensing
Altitude: -200ft to 16,500ft (-60m to 5,000m)

MXK-EFM-SHDSL-24-NTP 24 port EFM SHDSL line card with network timing and line power for MXK 319, 819 & 823 chassis
MXK-EFM-SHDSL-24-NTWC 24 port EFM SHDSL line card with network timing and wetting current for MXK 319, 819 & 823 chassis
See our How to Buy Page for pricing and purchase info.